Air Compressor & Blower Impeller Manufacturer
Matson manufactures custom air compressor impellers and blower-type centrifugal compressor impellers for selected OEM projects, based on drawing, material and tolerance requirements.
Scope note: Matson focuses on air compressor and blower-type centrifugal compressor impellers manufactured to customer drawings. We do not position ourselves as an aerospace turbo or high-end gas turbine impeller specialist. For high-pressure or aerodynamically critical applications, please share the specification so we can confirm process feasibility before quoting.
Compressor Impeller Types We Manufacture
Each project is reviewed against the customer drawing and tolerance to confirm the best casting and machining route.
Air Compressor Impellers
Custom centrifugal impellers for industrial air compressors, manufactured to drawing with material and balancing matched to operating speed.
Blower-Type Compressor Impellers
Low-pressure centrifugal blower compressor impellers used in process air, ventilation boost and wastewater aeration systems.
Custom Compressor Impellers
Drawing-based custom impellers for OEM compressor builders. Material, vane geometry and tolerance follow your specification.
OEM Replacement Impellers
Reproduction of compressor impellers from samples or original drawings, with material verification and dimensional inspection.
Closed Compressor Impellers
Closed (shrouded) compressor impellers for selected industrial applications where enclosed flow paths are specified.
Open / Semi-Open Compressor Impellers
Open and semi-open vane configurations for compressor projects where the drawing specifies these geometries.
Materials for Compressor Impellers
Material is selected based on operating temperature, pressure, fluid and required service life. Final grade is confirmed against the drawing and project specification.
From Drawing to Finished Compressor Impeller
Matson supports drawing-based manufacturing, from raw casting selection through finish machining, balancing, surface treatment and export packing.
Applications
Compressor impellers manufactured by Matson are typically used in industrial air and low-pressure process compression environments.
Industrial Air Compressors
Centrifugal impellers for industrial air compressor OEMs and equipment builders. View industry →
HVAC Centrifugal Blowers
Low-pressure compressor impellers for HVAC and air handling boosters. View industry →
Wastewater Aeration
Blower-type compressor impellers for wastewater treatment aeration systems. View industry →
Process Air & Combustion
Custom impellers for process air supply and combustion boost in industrial systems.
Technical Capability
Exact specifications are confirmed from your drawing. The table below is a quotation guide, not a fixed catalog.
| Manufacturing Type | Investment casting, CNC machining, casting + finish machining, billet machining |
|---|---|
| Common Materials | Stainless 304 / 316 / 316L, alloy steel, aluminum alloys, heat-resistant steel |
| Outer Diameter | Made to drawing; confirm maximum size with material and process route |
| Vane Geometry | Closed, open, semi-open per customer drawing |
| Surface Finish | Machined, polished, passivated, coated or customer-specified |
| Balancing | Dynamic balancing per drawing and operating speed |
| Accepted Files | PDF, DWG, DXF, STEP, STP, IGS, sample photos and physical samples |
Quality Control for Compressor Impeller Orders
Quality control on every compressor impeller order focuses on the dimensions, materials and balancing data that determine fit, rotation and operating performance.
Material Verification
Material certificates and grade confirmation are provided according to project requirements.
Dimensional Inspection
Critical dimensions such as bore, hub, vane profile and OD are checked against the drawing.
Balancing Reports
Dynamic balancing data is provided for high-speed compressor applications.
Compressor Impeller FAQ
Short answers for purchasing teams preparing drawings, samples or supplier comparisons.
What kind of compressor impellers do you make?
Air compressor and blower-type centrifugal compressor impellers for selected OEM projects, based on drawing.
Do you make aerospace or gas turbine impellers?
No. Matson does not position itself as an aerospace turbo or gas turbine impeller specialist. Please share the specification so we can confirm feasibility before quoting.
Do you have 5-axis CNC?
Yes, used for vane surfaces and complex compressor impeller geometries when the drawing requires it.
Which materials are most common?
Stainless steel, alloy steel and selected aluminum alloys are the most frequently quoted materials.
Can you reproduce a compressor impeller from a sample?
Yes. Sample reproduction is supported when the customer can provide the original part or detailed photos plus dimensions.
What should I send for a quote?
Drawing or sample, material, diameter, operating speed, quantity, balancing requirement and application environment.
Send Your Compressor Impeller Drawing
Get feedback on process feasibility, material, lead time and price for your custom compressor impeller project.
For a faster quote, include:
- 2D drawing or 3D file
- Material grade and quantity
- Diameter and vane geometry
- Operating speed and balancing needs